This post contains affiliate links, we'll earn compensation if you make a purchase using them at no additional cost to you 😊
Charging hoverboards is a straightforward process, but there are some best practices to follow for efficiency and safety. Hence, the answer to your question, ‘How long does it take to charge a hoverboard?’ will help you follow these practices.
While it may sound right to leave it plugged in overnight, this can damage the battery over time.
This article will cover everything you need to know about charging times, safety tips, monitoring charge status, and extending your hoverboard’s battery lifespan.
Whether you are charging for the first time or looking to optimize your existing routine, these charging basics will help you keep your hoverboard powered up and ready to roll.
Let’s get started.
How Long Does It Take to Charge a Hoverboard?
Charging a hoverboard from empty to full generally takes 2-3 hours. However, the exact charging time can vary based on the size of your hoverboard battery, the age of your battery, and the amperage of the charger you use.
Most standard hoverboard batteries range from 4.4Ah to 10Ah. The higher the amp hours, the longer it will take to charge fully.
If you have a hoverboard with a 4.4Ah battery, it may only take 2 hours to charge using a fast 2A charger completely. But if you have a 10Ah battery, it may take over 3 hours to charge using the same 2A charger.
Older batteries or batteries that have been through hundreds of charge cycles will also charge slower than newer batteries. The batteries start to lose capacity and efficiency as they age. So expect longer charge times from an older hoverboard.
The amperage rating of your charger makes a big difference. Most hoverboard chargers are rated between 1A and 2A.
A 1A charger provides a slower charge, while a 2A charger will charge your hoverboard about half the time. Fast chargers rated at 3A to 5A are sometimes available, but be cautious using these as they can damage your battery if misused.
How to Check If Your Hoverboard is Charging or Not?
You can check if your hoverboard is charging in several ways.
First, inspect that the charger is fully plugged into both the wall and the hoverboard’s charging port with a tight connection. Look for a charging indicator light, usually red, on the charger or hoverboard. The hoverboard’s battery indicator may show cycling lights during charging as well.
Listen for the internal fan, which spins during charging and stops when fully charged on some models. Try to turn on the hoverboard – if the battery is completely dead, it won’t turn on until partially charged.
Some hoverboards also have a mobile app that provides charging status and time remaining. An issue may need inspection if your hoverboard doesn’t charge when plugged in.
How Do You Know If Your Hoverboard is Completely Charged?
You can determine your hoverboard is fully charged when the indicator light turns solid green after blinking and the hoverboard powers on typically. Checking the voltage with a monitor and seeing it is at maximum capacity, around 37-42V, also indicates a full charge.
If your hoverboard has been charging without issue for the standard 2-3 hour time, it should be fully charged. And any reduction in speed or range is a sign that recharging is needed. Ideally, unplug your hoverboard promptly when fully charged to avoid potential overcharging problems.
What Happens If You Leave Your Hoverboard Charging Overnight?
Leaving your hoverboard plugged into the charger all night is not recommended. Once the battery is full, keeping it plugged in leads to overcharging, reducing battery life.
The extended charging time also causes excess heat buildup inside the battery that can damage components. In extreme cases, an overcharged battery can overheat, leak, or catch fire, making overnight charging a potential fire hazard.
You may also notice decreased range and lowered battery capacity over time due to overcharging. The charging port can also become damaged from the plug being left in too long. And electrical surges overnight can fry sensitive electronics.
While an hour or two past full charge is okay, regularly charging past capacity will lead to issues over time. It’s best to unplug your hoverboard as soon as it is fully charged.
How Long Does a Fully Charged Hoverboard Battery Last?
Once fully charged, most hoverboard batteries will provide 45 minutes to 1 hour of continuous ride time. The exact amount of run time from a full charge depends on several factors:
- Higher capacity batteries (7.5Ah-10Ah) provide longer run times than lower capacity batteries (4.4Ah-5Ah).
- Heavier riders will drain the battery faster than lighter riders.
- Riding on hills, grass, or rough terrain uses more power than smooth, flat surfaces.
- Frequent speed bursts drain the battery faster than cautious, steady riding.
- Colder weather reduces battery capacity compared to warm weather riding.
- Older, worn batteries have less run time than newer batteries.
When Should You Change Your Hoverboard Battery?
Most hoverboard batteries will need replacement with regular use every 2-3 years.
Signs that indicate it is time for a new battery include reduced maximum speed and acceleration, decreased range from a full charge, longer charging times, swelling or damage to the battery casing, and error messages related to the battery.
As lithium-ion batteries age, their capacity and performance diminish. Completely draining your hoverboard battery frequently, leaving it discharged for long periods, and exposure to high heat will cause it to degrade faster.
If your riding time from a full charge drops below 30-40 minutes under normal conditions, then replacing the battery will likely restore your hoverboard’s range.
Swapping in a new battery every few years helps maintain speed and range for optimal riding. Consider having your hoverboard inspected annually to determine if the battery needs replacement.
Tips to Boost Your Hoverboard Battery Life
To get the most life out of your hoverboard battery between charges, follow these key tips:
- Fully charge it each time: Give the battery a full charge instead of frequent partial charges. This improves battery chemistry.
- Avoid dropping to low voltages: Avoid running the battery down completely to empty before recharging. This puts strain on the battery.
- Store properly: Keep your hoverboard charged 50-70% if storing long-term. Remove the battery if storing >2 months.
- Use the proper charger: Only use the OEM charger with your hoverboard. Incompatible chargers damage batteries.
- Charge after each use: Do not let the battery sit discharged for days before your next ride. Recharge promptly.
- Check connections: Ensure charging ports and connectors are clean and undamaged for proper charging.
- Ride conservatively: Accelerating and braking aggressively consumes more battery than gentle riding.
- Ambient temperatures: Avoid exposing your hoverboard to hot or cold temperatures when in use and storage.
- Replace aging batteries: If your battery capacity diminishes significantly, replacing the battery can restore performance.
Bonus : If You want know more About the Fastest Electric Hoverboards In 2023 Click here
Safety Measures to Follow While Charging Your Hoverboard
While it is easy to plug in your hoverboard and start charging, there are some important safety tips you should follow:
- Use the original OEM charger that came with your hoverboard. Third-party chargers may overcharge or damage your battery.
- Do not leave your hoverboard unattended while charging. Remain nearby to monitor the process and unplug if any issues arise.
- Charge in a clean, dry area away from flammable materials. Do not charge near carpets or on beds.
- Avoid overcharging your hoverboard. As soon as it is fully charged, unplug it. Do not leave it charging for extended periods.
- Let your hoverboard cool down before charging if you have been riding it for a long. Charging it when it is hot can damage the battery.
- Do not charge your hoverboard in extremely cold temperatures. Only charge when the temperature is between 32°F and 113°F.
- Check that your charger does not feel hot when charging. If it feels very warm, this could indicate a defective charger.
- Do not charge your hoverboard if the battery is cracked, bloated, or damaged. Take it to a repair shop first.
By following these precautions, you can safely charge your hoverboard without incident. Take the time to charge properly so you can return to riding as soon as possible!
- Best Electric Scooters For Hills
- Charge E-Bike Battery Without Charger
- Advantages and Disadvantages of Electric Bicycle
Hoverboards provide a fun way to travel, provided you take the time to charge them properly. Most hoverboards require 2-3 hours of charging time to recharge the battery from empty.
For the safest charging experience, use the original OEM charger, charge safely away from flammables, and unplug your hoverboard promptly once fully charged.
Your hoverboard battery can deliver reliable power and a long lifespan with just a little daily maintenance!
So, use the tips mentioned above and keep your hoverboard’s battery life healthy!
Check if the charger power light comes on, the brick is warm during charging, the connector fits tightly into your hoverboard, and the charging indicator lights up as expected. The charger may be defective if no lights turn on or it does not seem to be charging.
If your hoverboard does not power after fully charging, the issue is likely with the battery or electronic components, not the charging process. You may need to have your hoverboard inspected and repaired by the manufacturer.
If a fully charged battery loses power more quickly than expected, the battery may be old and lose capacity. Completely drained batteries that are slow to recharge indicate an aging battery needing replacement.
You should avoid most fast chargers as they can overload hoverboard batteries. Unless specifically recommended by the manufacturer, use the standard 1-2A OEM charger with your hoverboard for safe charging times.